High-pressure piping systems with heat insulation
High-pressure piping systems with heat insulation
High-pressure piping systems with heat insulation layer represent polymer-armored flexible multilayer piping intended for transportation and pumping of aggressive media, oil, gas (including admixtures), chemical liquids under the temperatures from minus 60ºС to plus 60ºС and operating pressure of up to 180 аtm. They are used for laying on land and can sustain both dynamic and static loads.
High-pressure piping systems with heat insulation are intended specifically for low temperatures. Presence of the heat insulation layer makes it possible to significantly reduce thermal losses, accordingly the fluids may be transported over the long distances without additional heating.
The structure of the high-pressure piping systems with heat insulation may vary depending on the operation conditions and necessity to perform specified functions. The internal diameter may vary from 30 to 140 mm considering the operation conditions. Operating pressure is from 40 to 180 atm.
- To tie-in the segments the fitting gear is used.
- Patent protection of the design on the territory of Russia is ensured.
- The high-pressure piping systems are manufactured in accordance with the technical specifications of the manufacturer basing on the TU compliance certificate.
Please fill in the order form.
Order form template can be found in the section “Docs” at the bottom of the page.
Please send the filled order form to info@energomash-hps.com .
Our customer service manager will contact you within 24 hours.
High-pressure piping systems with heat insulation represent polymer-armored flexible multilayer piping.
High-pressure piping systems with heat insulation have the following structure:
-
Core – polymeric layer which ensures undamaged condition of the transported fluid. The core is made by continuous extrusion from the compositions based on the low pressure polyethylene.
-
Reinforcing layer – structural component comprising several layers of metal tape wrapped over in the opposite directions which enhances resistance of the flexible pipe to internal and external pressure and to mechanical collapse load.
- Anti-wear layer – non-metal layer in the form of tape wrapping intended for reduction of wear between the layers.
- Heat insulation layer – polymeric layer made of foamed polyethylene, which ensures heat conservation of the transported fluid.
- Outer sheath – polymeric layer intended for protection of reinforcing elements from corrosion, abrasive and mechanical damage and for retaining the elements in the position predetermined by shaping. The outer sheath is made by continuous extrusion from the compositions based on the low pressure polyethylene.
|
Inner diameter |
30 – 170 mm (1,5”– 7”) |
|
Operating temperature range |
-60°С … +60°С |
|
Operating pressure |
40 – 180 атм |
|
Maximum end-to-end dimension (for diameter 30 mm) |
3 200 mm |
|
Handled media |
oil, gas, water, abrasives, aggressive media |
High-pressure piping systems as compared to metal piping have the following advantages: larger end-to-end dimensions and consequently reduction of the installation time, provision for underwater, underground and aboveground laying. The components being in contact with the fluids and external environment are made of polymers and demonstrate high corrosion resistance.
The high-pressure piping systems may be placed into the narrow trench (the trench width is by 40% less than for steel piping). Due to reduction of the volume of welding works, works on protection of the welding joints and insulation coating, installation, laying and putting into operation is eight times as fast as in the case with the steel piping.
Irrespective of the fluid corrosive power the service life of the high-pressure piping systems is longer than for steel piping.
Depending on the operation conditions it is possible to make the reinforcing layer from polymer tapes, preserving the maximum values of the internal operating pressure, which provides for chemical resistance of the pipe to all aggressive media in case of production and transportation of gas and oil.
Five-layer inner liner, comprising a barrier layer made from special material, ensures reduction and complete elimination of gas permeability in comparison to other piping. Our competitors cannot boast of such opportunities Due to reduction of gas permeability the barrier layer decreases corrosion of metal tapes or completely fixes the problem. The piping of this type is used for delivery of oil and gas with high content of СО2, H2S and CH2.
The barrier layer of 1 mm thick demonstrates same characteristics as the wall made of the low -pressure polyethylene of 10m thick.
| Description | 50/115-40 | 65/125-40 | 80/140-40 | 100/165-40 | 110/180-40 | 125/200-40 | 140/215-40 |
| Inner diameter (mm) | 53,6 | 63,8 | 76,6 | 93,8 | 106,6 | 119,4 | 136,4 |
|
Outer diameter (mm) |
115,8 | 127,8 | 144,4 | 164,8 | 179,8 | 198,4 | 218,4 |
| Bending radius in storage (m) | 850 | 900 | 1000 | 1150 | 1250 | 1400 | 1500 |
| Bending radius in operation (m) | 850 | 900 | 1000 | 1150 | 1250 | 1400 | 1500 |
| Length on coiling reel (m) | 700 | 650 | 350 | 100 | 100 | 100 | 90 |
| Weight | |||||||
| Pipe weight (kg/m) | 9,49 | 11,12 | 13,56 | 16,64 | 19,01 | 24,99 | 28,88 |
| Pressure | |||||||
| Internal pressure (аtm) | 40 | 40 | 40 | 40 | 40 | 40 | 40 |
| Internal testing pressure (аtm) | 52 | 52 | 52 | 52 | 52 | 52 | 52 |
| Flow characteristics | |||||||
| Inner surface roughness (mcm) | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 |
| Temperature characteristics | |||||||
| Min. operating temperature(°C) | -60 | -60 | -60 | -60 | -60 | -60 | -60 |
| Max. operating temperature(°C) | +60 | +60 | +60 | +60 | +60 | +60 | +60 |
| Min. operating temperature(°C) | -15 | -15 | -15 | -15 | -15 | -15 | -15 |
| Mechanical characteristics | |||||||
| Flexural rigidity (kN·m^2) | 44,74 | 77,76 | 108,64 | 191 | 451 | 659 | 916,8 |
| Winding tension (kN) | 1 | 1,4 | 1,7 | 2,4 | 3,6 | 5,0 | 7,0 |
| Maximum tension load (kN) | 16 | 20 | 31 | 36 | 45 | 60 | 91 |
| Description | 50/115-100 | 65/130-100 | 80/145-100 | 100/165-100 | 110/180-100 | 125/200-100 | 140/220-100 |
| Inner diameter (mm) | 53,6 | 63,8 | 76,6 | 93,8 | 106,6 | 119,4 | 136,4 |
|
Outer diameter (mm) |
117,4 | 129,4 | 146 | 168 | 183 | 200 | 221,6 |
| Bending radius in storage (m) | 850 | 900 | 1050 | 1200 | 1300 | 1400 | 1550 |
| Bending radius in operation (m) | 850 | 900 | 1050 | 1200 | 1300 | 1400 | 1550 |
| Length on coiling reel (m) | 700 | 400 | 350 | 100 | 100 | 100 | 90 |
| Weight | |||||||
| Pipe weight (kg/m) | 10,92 | 12,78 | 15,53 | 21,4 | 24,35 | 27,98 | 35,68 |
| Pressure | |||||||
| Internal pressure (аtm) | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
| Internal testing pressure (аtm) | 130 | 130 | 130 | 130 | 130 | 130 | 130 |
| Flow characteristics | |||||||
| Inner surface roughness (mcm) | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 |
| Temperature characteristics | |||||||
| Min. operating temperature(°C) | -60 | -60 | -60 | -60 | -60 | -60 | -60 |
| Max. operating temperature(°C) | +60 | +60 | +60 | +60 | +60 | +60 | +60 |
| Min. temperature in the course of installation (without heating), (°С) | -15 | -15 | -15 | -15 | -15 | -15 | -15 |
| Mechanical characteristics | |||||||
| Flexural rigidity (kN·m^2) | 63 | 97,81 | 159,4 | 467,8 | 645 | 855,7 | 1496 |
| Winding tension (kN) | 1 | 1,4 | 1,7 | 2,4 | 3,6 | 5,0 | 7,0 |
| Maximum tension load (kN) | 17 | 25 | 35 | 50 | 64 | 80 | 115 |
| Description | 50/115-180 | 65/130-180 | 80/150-180 | 100/170-180 | 110/185-180 | 125/200-180 | 140/225-180 |
| Inner diameter (mm) | 53,6 | 63,8 | 76,6 | 93,8 | 106,6 | 119,4 | 136,4 |
|
Outer diameter (mm) |
117,4 | 131 | 147,6 | 169,6 | 185,4 | 202,4 | 224 |
| Bending radius in storage (m) | 850 | 950 | 1050 | 1200 | 1300 | 1400 | 1550 |
| Bending radius in operation (m) | 850 | 950 | 1050 | 1200 | 1300 | 1400 | 1550 |
| Length on coiling reel (m) | 700 | 400 | 350 | 100 | 100 | 90 | 90 |
| Weight | |||||||
| Pipe weight (kg/m) | 10,92 | 14,48 | 17,52 | 23,82 | 28,44 | 32,53 | 40,86 |
| Pressure | |||||||
| Internal pressure (аtm) | 180 | 180 | 180 | 180 | 180 | 180 | 180 |
| Internal testing pressure (аtm) | 234 | 234 | 234 | 234 | 234 | 234 | 234 |
| Flow characteristics | |||||||
| Inner surface roughness (mcm) | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 |
| Temperature characteristics | |||||||
| Min. operating temperature(°C) | -60 | -60 | -60 | -60 | -60 | -60 | -60 |
| Max. operating temperature(°C) | +60 | +60 | +60 | +60 | +60 | +60 | +60 |
| Min. temperature in the course of installation (without heating), (°С) | -15 | -15 | -15 | -15 | -15 | -15 | -15 |
| Mechanical characteristics | |||||||
| Flexural rigidity (kN·m^2) | 63 | 129,6 | 212,36 | 476,8 | 671 | 863,9 | 1696 |
| Winding tension (kN) | 1 | 1,4 | 1,7 | 2,4 | 3,6 | 5,0 | 7,0 |
| Maximum tension load (kN) | 47 | 54 | 62 | 98 | 72 | 80 | 115 |
|
Inner diameter |
30 – 170 mm (1,5”– 7”) |
|
Operating temperature range |
-60°С … +60°С |
|
Operating pressure |
40 – 180 атм |
|
Maximum end-to-end dimension (for diameter 30 mm) |
3 200 mm |
|
Handled media |
oil, gas, water, abrasives, aggressive media |
High-pressure piping systems as compared to metal piping have the following advantages: larger end-to-end dimensions and consequently reduction of the installation time, provision for underwater, underground and aboveground laying. The components being in contact with the fluids and external environment are made of polymers and demonstrate high corrosion resistance.
The high-pressure piping systems may be placed into the narrow trench (the trench width is by 40% less than for steel piping). Due to reduction of the volume of welding works, works on protection of the welding joints and insulation coating, installation, laying and putting into operation is eight times as fast as in the case with the steel piping.
Irrespective of the fluid corrosive power the service life of the high-pressure piping systems is longer than for steel piping.
Depending on the operation conditions it is possible to make the reinforcing layer from polymer tapes, preserving the maximum values of the internal operating pressure, which provides for chemical resistance of the pipe to all aggressive media in case of production and transportation of gas and oil.
Five-layer inner liner, comprising a barrier layer made from special material, ensures reduction and complete elimination of gas permeability in comparison to other piping. Our competitors cannot boast of such opportunities Due to reduction of gas permeability the barrier layer decreases corrosion of metal tapes or completely fixes the problem. The piping of this type is used for delivery of oil and gas with high content of СО2, H2S and CH2.
The barrier layer of 1 mm thick demonstrates same characteristics as the wall made of the low -pressure polyethylene of 10m thick.
| Description | 50/115-40 | 65/125-40 | 80/140-40 | 100/165-40 | 110/180-40 | 125/200-40 | 140/215-40 |
| Inner diameter (mm) | 53,6 | 63,8 | 76,6 | 93,8 | 106,6 | 119,4 | 136,4 |
|
Outer diameter (mm) |
115,8 | 127,8 | 144,4 | 164,8 | 179,8 | 198,4 | 218,4 |
| Bending radius in storage (m) | 850 | 900 | 1000 | 1150 | 1250 | 1400 | 1500 |
| Bending radius in operation (m) | 850 | 900 | 1000 | 1150 | 1250 | 1400 | 1500 |
| Length on coiling reel (m) | 700 | 650 | 350 | 100 | 100 | 100 | 90 |
| Weight | |||||||
| Pipe weight (kg/m) | 9,49 | 11,12 | 13,56 | 16,64 | 19,01 | 24,99 | 28,88 |
| Pressure | |||||||
| Internal pressure (аtm) | 40 | 40 | 40 | 40 | 40 | 40 | 40 |
| Internal testing pressure (аtm) | 52 | 52 | 52 | 52 | 52 | 52 | 52 |
| Flow characteristics | |||||||
| Inner surface roughness (mcm) | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 |
| Temperature characteristics | |||||||
| Min. operating temperature(°C) | -60 | -60 | -60 | -60 | -60 | -60 | -60 |
| Max. operating temperature(°C) | +60 | +60 | +60 | +60 | +60 | +60 | +60 |
| Min. operating temperature(°C) | -15 | -15 | -15 | -15 | -15 | -15 | -15 |
| Mechanical characteristics | |||||||
| Flexural rigidity (kN·m^2) | 44,74 | 77,76 | 108,64 | 191 | 451 | 659 | 916,8 |
| Winding tension (kN) | 1 | 1,4 | 1,7 | 2,4 | 3,6 | 5,0 | 7,0 |
| Maximum tension load (kN) | 16 | 20 | 31 | 36 | 45 | 60 | 91 |
| Description | 50/115-100 | 65/130-100 | 80/145-100 | 100/165-100 | 110/180-100 | 125/200-100 | 140/220-100 |
| Inner diameter (mm) | 53,6 | 63,8 | 76,6 | 93,8 | 106,6 | 119,4 | 136,4 |
|
Outer diameter (mm) |
117,4 | 129,4 | 146 | 168 | 183 | 200 | 221,6 |
| Bending radius in storage (m) | 850 | 900 | 1050 | 1200 | 1300 | 1400 | 1550 |
| Bending radius in operation (m) | 850 | 900 | 1050 | 1200 | 1300 | 1400 | 1550 |
| Length on coiling reel (m) | 700 | 400 | 350 | 100 | 100 | 100 | 90 |
| Weight | |||||||
| Pipe weight (kg/m) | 10,92 | 12,78 | 15,53 | 21,4 | 24,35 | 27,98 | 35,68 |
| Pressure | |||||||
| Internal pressure (аtm) | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
| Internal testing pressure (аtm) | 130 | 130 | 130 | 130 | 130 | 130 | 130 |
| Flow characteristics | |||||||
| Inner surface roughness (mcm) | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 |
| Temperature characteristics | |||||||
| Min. operating temperature(°C) | -60 | -60 | -60 | -60 | -60 | -60 | -60 |
| Max. operating temperature(°C) | +60 | +60 | +60 | +60 | +60 | +60 | +60 |
| Min. temperature in the course of installation (without heating), (°С) | -15 | -15 | -15 | -15 | -15 | -15 | -15 |
| Mechanical characteristics | |||||||
| Flexural rigidity (kN·m^2) | 63 | 97,81 | 159,4 | 467,8 | 645 | 855,7 | 1496 |
| Winding tension (kN) | 1 | 1,4 | 1,7 | 2,4 | 3,6 | 5,0 | 7,0 |
| Maximum tension load (kN) | 17 | 25 | 35 | 50 | 64 | 80 | 115 |
| Description | 50/115-180 | 65/130-180 | 80/150-180 | 100/170-180 | 110/185-180 | 125/200-180 | 140/225-180 |
| Inner diameter (mm) | 53,6 | 63,8 | 76,6 | 93,8 | 106,6 | 119,4 | 136,4 |
|
Outer diameter (mm) |
117,4 | 131 | 147,6 | 169,6 | 185,4 | 202,4 | 224 |
| Bending radius in storage (m) | 850 | 950 | 1050 | 1200 | 1300 | 1400 | 1550 |
| Bending radius in operation (m) | 850 | 950 | 1050 | 1200 | 1300 | 1400 | 1550 |
| Length on coiling reel (m) | 700 | 400 | 350 | 100 | 100 | 90 | 90 |
| Weight | |||||||
| Pipe weight (kg/m) | 10,92 | 14,48 | 17,52 | 23,82 | 28,44 | 32,53 | 40,86 |
| Pressure | |||||||
| Internal pressure (аtm) | 180 | 180 | 180 | 180 | 180 | 180 | 180 |
| Internal testing pressure (аtm) | 234 | 234 | 234 | 234 | 234 | 234 | 234 |
| Flow characteristics | |||||||
| Inner surface roughness (mcm) | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 | 1,5 |
| Temperature characteristics | |||||||
| Min. operating temperature(°C) | -60 | -60 | -60 | -60 | -60 | -60 | -60 |
| Max. operating temperature(°C) | +60 | +60 | +60 | +60 | +60 | +60 | +60 |
| Min. temperature in the course of installation (without heating), (°С) | -15 | -15 | -15 | -15 | -15 | -15 | -15 |
| Mechanical characteristics | |||||||
| Flexural rigidity (kN·m^2) | 63 | 129,6 | 212,36 | 476,8 | 671 | 863,9 | 1696 |
| Winding tension (kN) | 1 | 1,4 | 1,7 | 2,4 | 3,6 | 5,0 | 7,0 |
| Maximum tension load (kN) | 47 | 54 | 62 | 98 | 72 | 80 | 115 |
